Pangram verdict · v3.3
We believe that this document is fully human-written
AI likelihood · overall
HumanArticle text · 284 words · 1 segments analyzed
About This project turns an ESP32-S3 development board into an infinite filesystem inspired by the digital Library of Babel. Usage
Buy an ESP32-S3 development board - ideally one shaped as a USB stick for maximum bewilderment. This is the one I got, though you don't necessarily need this exact variant. That said, make sure you're getting an ESP32-S3. That's the only one I've tested. Others may not have hardware USB support. S2 might work, but I make no promises. Get Visual Studio Code and set up PlatformIO. Refer to Google or YouTube if you don't know how. Clone this repository with submodules. Again, if you don't know what that means, look it up. Open the cloned folder in VScode, wait for it to set up the project. While holding the "BOOT" button, plug the microcontroller into your PC. Click the "→" icon in VScode to compile and flash the project. Once that's done, disconnect and reconnect the microcontroller. Explore! You might have to copy files off of the MTP share before reading them, as most programs don't support reading directly from MTP.
Finding specific files
Install Bun. Navigate to the cloned folder and use the command bun run file-to-path.js <path>, where <path> is a path to the file you wish to find. Note that files larger than a couple hundred bytes will take a very long time to generate. Copy the path it returns and paste it into your file browser after disk/. Find the file, copy it off of the drive, and verify that it is in fact the same file.
Credits The hardware-facing bits of this project are loosely cobbled on top of RigoLigoRLC's work on esp32s3-tusb-mtp and their fork of espressif-tinyusb-component.